Airrex Dizel Isıtıcılar

Airrex heaters use a patented oil burner with an electric fuel pump. Combustion gases circulate through ceramic-coated pipelines inside the unit, generating infrared (radiant) heat that warms objects and people directly rather than just heating the air. This makes them highly efficient in draughty or open environments.

No. Complete combustion inside the unit means no separate exhaust piping is required in most working environments such as garages, workshops, warehouses, marquees, and terraces. Exhaust piping is only necessary if the heater is to be used in sleeping quarters or spaces with very limited ventilation.

Airrex heaters run on Neste MY biodiesel, standard diesel, or fuel oil. In temperatures below 10°C (50°F), winter-grade diesel or fuel is required to prevent fuel gelling and ensure reliable ignition.

Airrex heaters operate at approximately 48 dB, which is comparable to a quiet office or normal conversation. They are designed to be unobtrusive in working environments.

Airrex heaters are equipped with automatic shut-off systems that activate if the unit overheats, tips over, or detects a fault. The units are CE certified and comply with European safety standards.

After a power outage, the heater restarts automatically in the same operating mode it was in before the power cut. All settings are stored in non-volatile flash memory, so no manual re-programming is needed.

Yes. Airrex heaters feature an LED control panel and a remote control as standard. WiFi-enabled models can also be controlled via the Rex Nordic app (available for Android and iOS), allowing you to adjust temperature and settings from anywhere within range.

Fuel consumption varies by model and heat setting. As a guide, the AH-210i consumes approximately 0.85 L/h, the AH-310i approximately 1.3 L/h, and the AH-810i approximately 3.3 L/h at maximum output. Refer to the product manual for full consumption data at different power settings.

A mild odour may occur during the initial start-up and shut-down cycle due to brief periods of incomplete fuel atomisation. This is normal and not hazardous. During steady operation, a properly maintained Airrex heater produces no noticeable odour.

Yes. Annual maintenance is mandatory for the warranty to remain valid on Airrex heaters. This service includes replacing the oil filter, nozzle, and gaskets. Rex Nordic recommends using authorised service partners. Maintenance kits and spare parts are available from Rex Nordic warehouses.

Airrex heaters come with a standard 2-year warranty. Register your product at warranty.rexnordic.com within four weeks of purchase to extend your warranty to 3 years free of charge. Note that annual maintenance is a condition for warranty validity.

Genuine Airrex spare parts are held in Rex Nordic warehouses and are available through authorised dealers across Europe. Contact your local Rex Nordic representative or visit our Service & Spare Parts page to place an order.